2-in-1 Protective Case Made of Clear Acrylic and TPU

Product Detailed Description

A clear acrylic panel forms the rear plate, wrapped on every side by a flexible TPU bumper that curves over the corners. Metal fasteners thread into the frame channel to lock the sheet in place, tying the rigid acrylic and flexible bumper into a unified assembly. You flex the bumper outward with your thumb and forefinger to seat or remove the phone. The panel carries a painted epoxy finish, with select zones left translucent so a faint luminescent glow appears after the room darkens. On a counter or shelf, the transparent back lets a buyer read the phone's own color sitting behind the case.

• Rigid acrylic panel sits flush against the handset rear, leaving a flat open surface for screen-printing or a visible brand mark
• The TPU bumper extends past the screen face along the front lip, so the glass clears a flat desk when set down face-up
• Metal fasteners thread into the frame groove, anchoring the acrylic plate square so it sits true when gripped from a pocket or shelf edge
• Epoxy paint fused to the acrylic face leaves a smooth matte surface that wipes clean with a dry cloth between handling on the counter
• Panel cutouts align to the phone port and camera opening, so you plug a cable or frame a shot without removing the case